Design & SimulationMarch 19, 2021

DELMIA Communities Week in Review for March 15

This is the weekly blog post that will give a one-look overview…
Avatar The DELMIA Communities Team

Hello and Welcome to the Week in Review!

This is the weekly blog post that will give a one-look overview of what happened in the DELMIA Communities this past week. But there is a lot more than what you will see below. Visit the communities to see the exchange of information and ideas between members and DELMIA experts. With eight active communities, you are sure to find at least one to suit your DELMIA interests. Connect with us to exchange and share on the DELMIA Communities.

See you there!

Global Operations Community

Is Digital Twin and its Value fully understood?

Today’s era of manufacturing is spiked with words such as digitalization, disruptive, analytics, AI(1), flexibility, platform, predictive, digital continuity, order of one and many others. To address those in one or the other way, companies have no choice to achieve their transition without the Digital Twin. Continue reading on the community.

DELMIA Customers, COMEZ International and Geico Taikisha, Honored with Manufacturing Leadership Award

As manufacturing continues its journey toward the digital enterprise, it is important to recognize not just the projects and innovations themselves, but also the partners that support and enable the journey. Please visit the community to keep reading.

Virtual Factory & Robotics Community

Community Name Change to Virtual Factory & Robotics

Our “Robotics” community has been renamed as “Virtual Factory & Robotics”.

We changed the name to expand the scope of the community domain and welcome Virtual Factory users.

As a reminder of our 3DEXPERIENCE R2021x portfolio, the virtual factory domain contains these roles…Read the full post on the community.

Fabrication Community

Don’t miss the 2 Machining Trainings Sessions

Please find a list of Machining trainings dedicated to Partners available through 3DEXPERIENCE University. Please click here if you are a Partner.

If you want to learn about DELMIA brand capabilities for machining, watch Mike and Jeremy from SOLIDWORKS

Learn about a range of technologies available to SOLIDWORKS users to perform complex machining operations in your manufacturing process, including 3 Axis Milling, Wire EDM (Electrical Discharge Machining), and Machine Kinematics. You’ll discover how you can leverage a new offering from our DELMIA brand, Shop Floor Programmer to assist you in these operations. Watch it right in the community!

Process Engineering Community

Switch to 3D Work Instructions!

Read and see video of the “why, when, and how” on the Process Engineering community.

Ergonomics Community

From “Work in the office” to “Work from Anywhere”

Since 2020 we miss our Friday afternoon snack moments after work. But also for example the Monday morning “how was your weekend” talks with your co-workers at the coffee machine. In 2020 we started to work from home, but 2021 will be a turning point for most companies when their employees return to work, but not all and not all together: the “work from anywhere model” is considered. Please continue reading on the community.

Podcast: Ergonomics Workplace Designer – How to fit a day’s work into 30mn | DELMIA

Visit the community to tune in.

Planning & Optimization Community

If people are your most important asset….

If people are your most important asset then please read this blog, on what to consider when planning your workforce. Visit the community to continue reading.

DELMIA Quintiq S&OP value in 2 minutes

Keeping it short can take a lot of effort.

Before talking solutions, Sales and Operations Planning (S&OP) is a five steps process. Read the rest of the post on the community.

Manufacturing Operations Management

DELMIA Apriso BPM Classroom Training for HSY

HSY, one of the largest DELMIA Apriso partners in China, recently hired dozens of new engineers to prepare the booming MES business, which is expected to grow at least 20% over last year. To make sure these new engineers equipped with appropriate knowledge for their roles,…. Find out more on the community.

DELMIA Apriso MPI Integration with SSAS Roles

From Apriso 2018 release, MPI gets new functionality to fully support Microsoft Analysis Services roles which grant access to operations, objects or even data at pivot grid cell level. This powerful functionality lets MPI admins to hide values of dimension’s attributes which is particularly useful in case of enterprise MPI deployments. Keep reading on the community.

Thanks for reading – see you next week! In the meantime, don’t forget to keep up to date with the DELMIA Communities.

Stay up to date

Receive monthly updates on content you won’t want to miss


Register here to receive a monthly update on our newest content.